Yuanxian High-tech Material Trading (Tianjin) Co., Ltd. is one of the leadnig manufacturers and suppliers of cermet rod in China. We provide advanced materials made in China with low price. Welcome to wholesale bulk CE approved cermet rod from our factory. Contact us for customized service and free sample.
Cermet Rod
Product Introduction
|
Material |
ceramic(hard) phase and a metal(or alloy) binder phase, etc. |
|
Meet requirements |
GB10, GB20, TM52, TM60, GT35 and WSG53 TiC Rods, etc. |
|
Specifications |
D12×40mm, D12×60mm, D14×50mm, D14×60mm, D14×70mm, D16×50mm, etc. , which can also be customized. |
|
Logo & package |
As your requirements. |
|
Other related products |
prestressed steel wire, anchorage, galvanized steel strand, etc. |
Product Specification
We have Grade GB10, GB20, TM52, TM60, GT35 and WSG53 Titanium Carbide Rods available. Its performance characteristics as follows:
1. Good weldability and castability. The steel bonded alloy matrix is a type of high manganese steel, which exists as a single austenite phase at room temperature and has high strength, which is beneficial for improving the resistance to thermal stress during casting. It can be welded with ordinary high manganese steel electrodes or connected to the substrate through casting, which is simple to operate and easy to produce, and can reduce manufacturing costs and shorten production cycles.
2. High hardness and wear resistance. A large amount of refractory metal carbides (titanium carbide) are dispersed in steel bonded alloys, which have high hardness; At the same time, the matrix is high manganese steel with work hardening characteristics, which greatly improves the wear resistance of the product.
3. Excellent cost-effectiveness. Compared with tungsten cobalt hard alloy, steel bonded alloy has a low density (about 6.0g/cm3, which is 40% of tungsten cobalt hard alloy) and has a good cost-effectiveness advantage.
|
Grade |
Hard Phase |
Binder Phase |
Density |
Hardness |
TRS |
Impact Toughness |
|
|
g/cm3 |
Annealing |
Hardening |
Mpa |
J/cm2 |
|||
|
HRC |
HRA |
||||||
|
TM52 |
TiC |
Alloy steel |
6.10-6.30 |
Sintered state: HRC≥60 |
≥1500 |
H2O toughing treatment ≥ 6.0 |
|
|
Grade |
Binder Phase |
Density |
Hardness |
Impact Toughness |
|
|
g/cm3 |
Annealing |
Hardening |
J/cm2 |
||
|
HRC |
HRA |
||||
|
WSG53 |
Alloy steel |
5.9-6.0 |
Sintered state: HRC:72.0-75.0 |
≥ 2.5 |
|
|
Grade |
Hard Phase |
Binder Phase |
Density |
Hardness |
TRS |
Impact toughness |
|
|
g/cm3 |
Annealing |
Hardening |
Mpa |
J/cm2 |
|||
|
HRC |
HRA |
||||||
|
GT35 |
TiC |
Alloy steel |
6.40-6.60 |
≤48 |
≥86 |
≥1400 |
≥ 3.5 |
|
Size |
Material |
Application |
|
Customized Guide rollers' size varies according to the different wire rods. The main dimensions and structures are: outer diameter and thickness, groove type and bearing hole. |
GT35 Guide roller |
Guide wheel (also known as guide roller) is an indispensable part of wire rod in the rolling process of steel rolling plant. It requires high hardness, good wear resistance (matching the service life with high-quality bearings), good thermal conductivity, and a certain degree of red hardness, especially for high-speed wire rolling (the rolling speed is 80-120m/s). |
Product Details
TM52, GT35, WSG53 Titanium Carbide Rods available:
TM52 is mainly used for wear-resistant parts of crushing machinery and non-magnetic molds in mining and cement industries.
1.φ12*40mm
2.φ12*60 mm
3.φ14*50mm
4.φ14*60mm(Tic Threaded Rod)
5.φ14*70mm
6.φ14*80mm
7.φ14*90mm
8.φ16*50mm
9.φ16*60mm
10.φ16*70mm
11.φ20*40mm
12.φ20*60mm (Spray-granulated Tic Rod)
13.φ20*80mm (Spray-granulated Tic Rod)
WSG53 is widely used in various impact working conditions industries such as mining, cement, sand making, etc.
1.φ12*30mm,
2.φ16*30mm.
GT35 is mainly used for cold processing molds, such as cold heading, cold drawing, cold shearing, cold extrusion, cold pressing molds and refractory molds.
Titanium Carbide Rod:
1.φ13*95mm,
2.φ20*90mm.
Titanium Carbide Guide Rollers(Inner Diameter * Outer Diameter * Height):
1.φ53*φ12*22mm ,
2.φ61*φ16*35mm.
Production Applications
Cutting Tools: Titanium rod is used in the manufacture of high-performance cutting tools for machining hard materials. The hardness and wear resistance of TiC make it ideal for drill bits, milling cutters, and other cutting tools.
Wear Parts: Employed in various industrial wear parts that are subjected to high levels of abrasion and wear. Common in industries such as mining, metalworking, and construction.
Cermets: TiC rods can be used as a component in cermet materials, which combine the properties of ceramics and metals. Suitable for applications that require a combination of high hardness and toughness.
Coatings: Used as a precursor for creating wear-resistant coatings on metal surfaces. TiC coatings enhance the durability and lifespan of components exposed to high wear and corrosion.
Abrasives: Utilized in abrasive applications for grinding and polishing hard materials, such as metals and ceramics.
Electrodes: Used in electrical discharge machining (EDM) electrodes due to their conductivity and wear resistance. Suitable for electrical contacts in harsh environments.
Armor and Protective Gear: Employed in the manufacture of lightweight, high-hardness armor for personal and vehicle protection.
Certificate
Our products have CE, SGS, ISO Certificates.
Packaging And Delivery
Packing: As your requirement.
FAQ
1. What is your delivery time?
We offer fast delivery: stock items ship in 7-15 days, while custom orders typically take 15-30 workdays, depending on your specific quantity.
2. How do you guarantee product quality?
Quality is verified through Mill Test Certificates (MTC) included with every shipment, and we fully support third-party inspections for your peace of mind.
3. Are there any hidden costs?
No. Our quotations are transparent and all-inclusive, ensuring you won't encounter any unexpected or additional fees.
4. Do you provide samples?
Yes, we provide samples for a nominal fee of $1; you just need to cover the freight cost to evaluate our quality firsthand.
5. What payment terms do you accept?
We accept T/T at sight and L/C, as well as Cash and Western Union. Please contact us if you require alternative arrangements.
6. What is your MOQ?
Our standard MOQ is usually one container, but we offer flexibility for specific items; please get in touch to discuss your requirements.
7. Can you produce according to my drawing?
Absolutely. We specialize in OEM and custom manufacturing, and our engineering team can produce exact specifications based on your drawings.
Hot Tags: cermet rod, China cermet rod manufacturers, factory, low relaxation pc wire, Prestressed Steel Strand, prestressed steel wire with indentations, plain pc wire, low relaxation prestressed strand, high performance steel
